416.900.3549

info@ccc.camera

416 - 900 - 3549

Teradek Bolt 3000


Get a quote Toronto Equipment Rental

​​​​​info@ccc.camera

Transmit uncompressed 1080p SDI or HDMI video wirelessly over 3000 feet line-of-sight with the Teradek Bolt 3000 SDI/HDMI Wireless Transmitter & Receiver Deluxe Kit. Included in this set are a Teradek Bolt 3000 transmitter and receiver, which are equipped with both 3G-SDI and HDMI ports. The transmitter can pair with and multicast to up to four receivers (additional receivers not included). When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary. The included Panel Antenna improves reception in crowded frequency situations.

Transmitting across the 5 GHz frequency range, the transmitter/receiver pair utilizes Dynamic Frequency Selection (DFS) to find a clean signal between the transmitter and receiver. This is desirable when working in areas with crowded frequencies. Both transmitter and receiver are equipped with HDMI and SDI ports, which allow for cross conversion from HDMI to SDI and SDI to HDMI during transmission. The transmitter also features a loop-through SDI output. The USB GRAB engine streams the uncompressed video straight out of the receiver and into a PC for immediate recording. The included waterproof case with custom-cut foam carries all the bundled components during transport and storage.

Transmitter/Receiver Features 

Transmission Distance 
The Bolt 3000 transmitter and receiver pair can transmit 1080p60 video up to 3000' line-of-sight with less than 1 ms of latency when not converting video formats.

Cross Conversion 
The transmitter and receiver can cross convert your video signal during transmission.

Durability 
The hardened aluminum chassis is designed to withstand the rigors of production, and features 1/4"-20 threaded mounting holes.

USB Grab Engine 
The built-in USB port on the receiver enables direct connection to a computer, so you can capture video directly from the receiver into your computer over USB 3.0. With this video available, rough edits can be made even before the footage is offloaded from the camera.

OLED Info Screen 
A built-in OLED information screen is built into the receiver. This enables rapid setup and confirmation of your settings.

3D LUT Support 
Utilizing the OLED screen, you can apply 3D LUTs with the press of a button. Upload your own LUTs using the free Bolt Manager software, or select from several built-in presets using Bolt's OSD.

20 MHz and 40 MHz Channels 
You can select to transmit in 20 or 40 MHz channels. However, please note that while 20 MHz channels allow you to operate more wireless systems at once in a single location and offer a more robust wireless link in challenging RF conditions, they do not support audio transmission, as well as interlaced, PsF, and 1080p 60/50 frame rates. The 40 MHz channels support audio, interlaced, PsF, and 1080p 60/50.

Timecode and Metadata Support 
All 3G-SDI Bolt models support metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic.

Dynamic and Manual Frequency Selection 
You can select either dynamic or manual frequency.

Panel Antenna Array 
The Array offers a more resilient wireless transmission, especially in challenging RF conditions, by focusing the signal and reducing interference. As a result, you may achieve a boost in the reception range, but it will not be above the maximum range.

Features

Focuses the wireless signal and reduces interference to achieve a boost in reception range (but not above max range of Bolt set)
Composed of three 16 dBi and two 14 dBi antennas using 5.1-5.8 GHz MIMO
Small, lightweight, and made from UV-protected plastic with aluminum alloy

Protective Case 
The Teradek Protective Case is an injection molded military-standard waterproof case built by SKB. Molded of ultra high-strength polypropylene copolymer resin, this case features a gasketed, water and dust-tight, submersible design that is resistant to corrosion and impact damage. Additional amenities include:

Waterproof and dust-tight design
Molded-in hinge for added protection
Trigger release latch system
Snap-down, rubber over-molded cushion grip handle
Ambient pressure equalization valve
Resistant to UV, solvents, corrosion, fungus
Resistant to impact damage